Laguna Mobility Kit

[Greg Bender]

Could anybody that has a Laguna Mobility Kit installed on there Bandsaw possibly take some pictures of the install.I'm also wondering exactly where it is installed .Also need dimension of where the piece that the handle hooks on to is located.I have a kit and I'm trying to adapt it to a Grizzly 0514.The width is OK ,the wheels are outboard of the edge of the saw but the back wall of the base of my saw is not on the centerline of the saw. Pm me if I did not succeed in explaining myself well.
Thanx,Greg

[Wes Grass]

Don't know how useful this might be, and I can't make anything better as the saw is long gone.


185353

[Greg Bender]

Wes,
Thanx for the picture.I am trying to adapt the kit to a Grizzly and after looking at your picture realize that a Laguna cabinet base is centered on the base platform and the grizz is not.It will be tippy picking up from an offcenter single point, I also do not have the black piece that the handle grabs the base with.Any chance you could email me that same picture.Thanx again,
Greg