Oneway Drill Wizard

[Tim Thiebaut]

The drill wizard comes with a "1 post, unfortunatly my lathe has a "5/8 post, does anyone know of a comparable product with a 5/8 post? I would even be ok with DIY plans to make my own out of wood or something along those lines, I would just like to be able to take advantage of the drill indexing feature on my 1220, thanks for any help on this, Tim

[John Keeton]

Tim, go out and get the current issue of Woodturning Design (then subscribe!) It has an entire article on building a drill guide - kind of a take offf from the Oneway Drill Wizard.

[Quinn McCarthy]

I had the same problem. Except the opposite. My tool rest was 1 1/4". I made a sleeve out of gavanized pipe. Took some filing. Well baybe it was a lot of filing. I also rilled a hole through the sleeve for the bolt.

Hope that helps.

Quinn

[Bernie Weishapl]

John beat me to it but it is a really nice article. Woodturning Design is a great magazine.

[Tim Thiebaut]

Thank you guys!

[Steve Hayes]

I removed the 1" and purchased a 5/8 from Woodcraft and tapped a hole in the end and bolted it to the Drill Wizard. Works great.