Napkin Rings

[Ron Stadler]

OK, you may have already guessed it. I have been watching Bob Hamilton video's and have to give one of his latest tutorials a shot, I had quite a fun time making these and also made a jig to make some bracelets. One thing I did find out on the bracelet is that when you make them from a board (flat stock) and drill them and put them on the jig for turning is that you are then cutting directly into end grain with your spindle gouge making it a little difficult to turn a bead.

The napkin rings here are made from, I believe maple or poplar that I cut up from greenwood last year, and then put a spray on varnish finish.

Also got to try out the new photo tent I put together today.:)184604

[dan carter]

His tutorial was very good, you did a good job. They will make any napkin proud.

[Andrew Arndts]

Ya know he could make a mint selling his Video's instead of putting them out on u tube. Thank goodness he doesn't because I wouldn't have anything else to make besides Pens, Bowls, Treen's, and other nick nacks.
Yet I also have to tip my hat to Carl Jacobson too. Nor Capt. Eddie.

[John Keeton]

Ron, very nice work! They all look amazingly alike - not sure I could do that!

Congrats on the photo tent. What color is your backdrop? Just wondering if the colors in the pic are true.

[Gary Conklin]

Nice little project! Those look great too!

[Jack Gaskins]

Ron, can you post a photo of your braclet jig. My wife wants me to make her some braclets but I need a way of holding them while turning. Thanks.

[Leo Van Der Loo]

You did very well on those Ron, nice ones ;-))

[gary Zimmel]

Nice work on the napkin rings Ron.

[David E Keller]

Those look great, Ron.

Jack, I'd watch Bob Hamilton's youtube video for the details on his homemade 'collet' system.

[Bernie Weishapl]

Ron those look really nice. Well done. I watch his video all the time.

[Harry Robinette]

Ron
I've made allot of those but all of them by accident.Nice job
Harry

[Mark Hubl]

Those look good Ron. Nice set.

[Ron Stadler]

Thanks everyone for the nice replies:), John the colors in the pic did come out true, I bought the green background paper and a cream color one. I think I'm liking the tent thingy which is kinda fun, feel like I'm a photographer. Also having a pool table at home made it kinda nice for the setup, I just changed the light bulbs to a little bit stronger wattage and it lit up these rings pretty well, but I put bowl in there and wasn't getting quite enough in front of the bowl so I will have to do something there.

Well I'm getting on here a little late so I'll post those pics tomorrow Jack, but really it is pretty much the same as the napkin jig only bigger, I used it to turn the outside of the bracelet and then stuck it in my 4 jaw chuck on expansion mode and turned the inside one half of it at a time.

Your'e right Andrew, but don't tell them about it, I really love all there tutorials and Bob cracks me up sometimes. I hope he and all keep making these for us, they are so informative and entertaining to watch. I actually made 12 hours of DVD's from the you-tube video's so I can watch them on the big screen and amazingly they look pretty darn good.:cool:

[Bob Hamilton]

Hi, Ron:
Looks like you did a good job! When I decided to make the napkin rings I was already out in my shop and I wasn't sure how big the hole should be so I took a guess and made my first fixture for rings with a 1 1/4" hole and then made one ring with that size hole. Then I came back in the house and did some searching on the net and found out the hole should be 1 1/2", so when I went out after supper I made the fixture in the video. I did find a use for the 1 1/4" fixture, though. I found that I could stick one end of a strip of sandpaper in one of the slots and wrap the rest of the strip around the fixture. That worked really well to sand the inside of the holes on the 40 napkin rings I turned over the next couple of days. :D

Take care
Bob

[bob svoboda]

Really nice job on the napkin rings-very consistent from what I can see. Kudos to Bob H for sharing his tricks of the trade.

[Ron Stadler]

Thanks Bob, I really enjoy all your video's, there Great and am always looking forward to the next one. When I made the napkin rings I set my caliper to the outside dimension and started turning only to find out when I had done finished all them (finish and all) that each one was growing by a 16th of an inch or more, So I guess these old calipers that I got off ebay were opening up each time I put them across the spindle, their old german calipers but they don't have a lock on them. Anyway, through all back on the jig and returned them.

Jack here are the pics I promised and like David said you can go to Bob's videos and see how he made them.

184712184713

First pic bracelet jig is on the left and I used the wood cone that fits over my tailstock center to open up the collet of the jig. The jig itself just fits in my four jaw chuck and the napkin jig as shown is threaded to fit my head stock spindle threads.

[Michael Short]

Nice work Ron. Looking forward to seeing them.

Bob H does alot of videos and I really like that he is willing to take the time and shares it with all of us.

[Jack Gaskins]

Thanks Bob, I really enjoy all your video's, there Great and am always looking forward to the next one. When I made the napkin rings I set my caliper to the outside dimension and started turning only to find out when I had done finished all them (finish and all) that each one was growing by a 16th of an inch or more, So I guess these old calipers that I got off ebay were opening up each time I put them across the spindle, their old german calipers but they don't have a lock on them. Anyway, through all back on the jig and returned them.

Jack here are the pics I promised and like David said you can go to Bob's videos and see how he made them.


184712184713

First pic bracelet jig is on the left and I used the wood cone that fits over my tailstock center to open up the collet of the jig. The jig itself just fits in my four jaw chuck and the napkin jig as shown is threaded to fit my head stock spindle threads.

Thanks for posting the photos. By the way, how thick is the walls of the big jig?

[Ron Stadler]

Thanks Bob, I really enjoy all your video's, there Great and am always looking forward to the next one. When I made the napkin rings I set my caliper to the outside dimension and started turning only to find out when I had done finished all them (finish and all) that each one was growing by a 16th of an inch or more, So I guess these old calipers that I got off ebay were opening up each time I put them across the spindle, their old german calipers but they don't have a lock on them. Anyway, through all back on the jig and returned them.

Jack here are the pics I promised and like David said you can go to Bob's videos and see how he made them.

184712184713

First pic bracelet jig is on the left and I used the wood cone that fits over my tailstock center to open up the collet of the jig. The jig itself just fits in my four jaw chuck and the napkin jig as shown is threaded to fit my head stock spindle threads.

When I posted this pic I goofed the bracelet jig I made to big the first time and acidently posted it instead of the new one I made at 2 3/8" instead of 2 3/4" as shown. You can then open up your bracelet to the average size of 2 1/2" when turning the inside just remember to leave enough meat on the outside to do so or you can leave it at 2 3/8" for small wrist and hands( sorry for the confusion.)