Dianne Mitchell
02-23-2011, 5:55 PM
I have used spray Thermark with great success, but the waste (and cost) made me crazy. So I opted to try the "paste".
I have the settings down pat, but was wondering if anyone else has experienced "staining" of the metal. I am only brushing on the area that will be lasered, but when I wash off the Thermark, there is a decided stain...this is a raw, brushed finish brass. I also noticed it to a lesser degree with a raw stainless.
Any ideas?
I have the settings down pat, but was wondering if anyone else has experienced "staining" of the metal. I am only brushing on the area that will be lasered, but when I wash off the Thermark, there is a decided stain...this is a raw, brushed finish brass. I also noticed it to a lesser degree with a raw stainless.
Any ideas?