Chris DiCiaccio
04-13-2003, 10:11 PM
Hi to all,
A friend who does electrical work gave me this pine which was being used in a new house for ceiling beams. The pieces are all solid and were cut off the ends and were going to be dumped. These blocks are approx. 7 1/2"x 11 1/2"x 3'. I have a Delta 14" Bandsaw with riser block and timberwolf 1/2" 3 tpi blade. I want to saw these into the best usable boards for small furniture. Any wisdom, suggestions, or things to do or not do. Totally it's about 102 bf.
<img src="http://members.aol.com/woodwk/PINE1.JPG">
<br>
<img src="http://members.aol.com/woodwk/PINE2.JPG">
A friend who does electrical work gave me this pine which was being used in a new house for ceiling beams. The pieces are all solid and were cut off the ends and were going to be dumped. These blocks are approx. 7 1/2"x 11 1/2"x 3'. I have a Delta 14" Bandsaw with riser block and timberwolf 1/2" 3 tpi blade. I want to saw these into the best usable boards for small furniture. Any wisdom, suggestions, or things to do or not do. Totally it's about 102 bf.
<img src="http://members.aol.com/woodwk/PINE1.JPG">
<br>
<img src="http://members.aol.com/woodwk/PINE2.JPG">