Russ Filtz
02-20-2011, 10:35 AM
OK, how do I figure out the spaghetti mess of wiring on this opener? I dislodged a wire or two while fixing the motor collar to the screw drive. Tried to replace where I thought they went, tried all combinations of terminals, but just made things worse! The three cables disappear into the ceiling drywall, so I have no idea where each one goes or even if all wires are "active"/needed.
Right now the light does not come when door is activated. The inside control does not actuate the door every time. Mostly it starts then reverses and I have to hit the button 3-4 times. Weirdly the car remote works fine!
It's a Genie which i did not install. Even if I can find a manual online, I still need to figure out what each wire does in each cable. :( Guess I need to buy a remote continuity tester.
183350
Right now the light does not come when door is activated. The inside control does not actuate the door every time. Mostly it starts then reverses and I have to hit the button 3-4 times. Weirdly the car remote works fine!
It's a Genie which i did not install. Even if I can find a manual online, I still need to figure out what each wire does in each cable. :( Guess I need to buy a remote continuity tester.
183350