Mike Keating
01-17-2005, 10:02 AM
Hello all,
Well after a couple months I finally got the Tall Hall seat my wife wanted completed and set up. It is made of solid cherry and finished with 1 coat of Seal-A-Cell and 2 coats of Arm-R-Seal gloss and 1 coat of Arm-R-Seal satin.
I finally used some hand tools on a project, I hand cut the box-joints on the base of the project. They turned out pretty good for my first try. I am going to try an incorporate more and more hand tools into my future projects.
Sorry for the poor picture quality.
Mike Keating
Well after a couple months I finally got the Tall Hall seat my wife wanted completed and set up. It is made of solid cherry and finished with 1 coat of Seal-A-Cell and 2 coats of Arm-R-Seal gloss and 1 coat of Arm-R-Seal satin.
I finally used some hand tools on a project, I hand cut the box-joints on the base of the project. They turned out pretty good for my first try. I am going to try an incorporate more and more hand tools into my future projects.
Sorry for the poor picture quality.
Mike Keating