Andrew Joiner
02-09-2011, 5:20 PM
I used 2- Porter Cable 505 half sheet sanders one in each hand 30 years ago. They were the standard finish sander back then . I've been using 5" RO sanders in recent years and just got a Milwaukee 6021-21 that works fine and is a good value price wise.
I have been trying to make my sanding go faster, so I thought what about the latest 1/2 sheet sanders. A 1/2 sheet has way more area than a 5" disk. Even more than a 6" disk. Regular paper is cheaper than H&L disks and readily available.
I've tried a Bosch 6" RO sander but I needed to hold it with 2 hands. So I went to my local dealer and asked to try sanders one could use one handed.
I tested the 5" Festool ETS 125 and the Festool RS 2E half sheet side by side. The 5'' was slower at removing pencil marks than the RS 2E. The ETS 125 had near new 100 grit in it but the RS 2E had a fresh 120 grit sheet. Both worked fine one handed. So with that in mind I was impressed with the RS 2E. The ETS 125 didn't seem any better than my Milwaukee 6021-21 I made some notes and thought that maybe the modern half sheets have improved over the old 505's.
I saw the Bosch 1293D 1/2-Sheet was well reviewed on Amazon and it's made in Switzerland like the fine Bosch jig saw I have.
So I just received the new Bosch 1293D 1/2-Sheet. $144 and Swiss made. I tested it side by side with the $60 Milwaukee 6021-21 made in China.
I'm disappointed . I see no reason to keep the Bosch. It's slightly slower than the Milwaukee and heavier. I guess the Bosch may be better on large flat areas with 320 or finer, but I rarely do that.
Oh well. I hope Amazon will take it back. I see Bosch has a 30 day satisfaction warranty.
All the sanders I tested left the same minimal swirl finish.
Anyone else have suggestions on a one handed sander that's fast?
I have been trying to make my sanding go faster, so I thought what about the latest 1/2 sheet sanders. A 1/2 sheet has way more area than a 5" disk. Even more than a 6" disk. Regular paper is cheaper than H&L disks and readily available.
I've tried a Bosch 6" RO sander but I needed to hold it with 2 hands. So I went to my local dealer and asked to try sanders one could use one handed.
I tested the 5" Festool ETS 125 and the Festool RS 2E half sheet side by side. The 5'' was slower at removing pencil marks than the RS 2E. The ETS 125 had near new 100 grit in it but the RS 2E had a fresh 120 grit sheet. Both worked fine one handed. So with that in mind I was impressed with the RS 2E. The ETS 125 didn't seem any better than my Milwaukee 6021-21 I made some notes and thought that maybe the modern half sheets have improved over the old 505's.
I saw the Bosch 1293D 1/2-Sheet was well reviewed on Amazon and it's made in Switzerland like the fine Bosch jig saw I have.
So I just received the new Bosch 1293D 1/2-Sheet. $144 and Swiss made. I tested it side by side with the $60 Milwaukee 6021-21 made in China.
I'm disappointed . I see no reason to keep the Bosch. It's slightly slower than the Milwaukee and heavier. I guess the Bosch may be better on large flat areas with 320 or finer, but I rarely do that.
Oh well. I hope Amazon will take it back. I see Bosch has a 30 day satisfaction warranty.
All the sanders I tested left the same minimal swirl finish.
Anyone else have suggestions on a one handed sander that's fast?