Kreg Router Table -- Anyone add drawers?

[Matt Meiser]

I bought a Kreg router table leg kit today while visiting Woodwerks today. I can't use the Sidewinder crank with my Woodpecker lift unless I make major modifications to my current table and decided this was an easier way to go. One think I want to do is add at least some storage in the form of drawers. Has anyone done this?

[Matt Meiser]

It took a long time, but I finally got around to this. I've had a pile of router stuff sitting on my shop floor since not too long after this post.

I was able to fit a large drawer on the bottom. Higher up proved to be trickier due to the Sidewinder, so first I built a homebrew version of Rockler's dust bucket first (several months ago) which has an opening for accessing the router switch and also supplying makeup air for dust collection. Then I built a small cabinet on one side that has room for three plastic bins I found at Target. There's also room for another narrow but deep drawer under the dust shroud should I choose to build one.

206002206001206000205999