View Full Version : Bird House
David Wilson
01-15-2005, 4:55 PM
Here is my latest attempt at turning. Made of cedar. The body is a glue up of 8 pieces cut at 22.5 deg. Turned into a cylinder. The top is made of flat boards glued up and then turned into a cone shape. The bottom is attached with pocket screws so it can be remover for cleaning. Finish is spray exterior poly.
The cylinder is 5 1/2" in diameter and the house stands 10" high.
The shingle effect is done with a wood burner.
Thanks for lookinghttp://www.sawmillcreek.org/attachment.php?attachmentid=14942&stc=1
Dick Parr
01-15-2005, 5:06 PM
Very nice design there Dave and it looks like a lot of work went into it. :)
Nice job.
Ted Shrader
01-15-2005, 5:17 PM
David -
Nice job! Very unique design. I really like the shingle effect.
What is the hole diameter? Put out a For Rent sign, it should have some occupants come spring.
Ted
David Wilson
01-15-2005, 5:19 PM
David -
Nice job! Very unique design. I really like the shingle effect.
What is the hole diameter? Put out a For Rent sign, it should have some occupants come spring.
TedThe hole is 1 1/8" diameter
Chad Pater
01-15-2005, 6:59 PM
Very nice
BTW are you staying warm up there? Sure has been cold here!
Chad
David Wilson
01-16-2005, 11:06 AM
Very nice
BTW are you staying warm up there? Sure has been cold here!
ChadJust checked the temp at 10:00 AM and it is up to 13 below. They are sayiny we could be above zero on tuesday.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.