Bird House

[David Wilson]

Here is my latest attempt at turning. Made of cedar. The body is a glue up of 8 pieces cut at 22.5 deg. Turned into a cylinder. The top is made of flat boards glued up and then turned into a cone shape. The bottom is attached with pocket screws so it can be remover for cleaning. Finish is spray exterior poly.
The cylinder is 5 1/2" in diameter and the house stands 10" high.
The shingle effect is done with a wood burner.
Thanks for lookinghttp://www.sawmillcreek.org/attachment.php?attachmentid=14942&stc=1

[Dick Parr]

Very nice design there Dave and it looks like a lot of work went into it. :)

Nice job.

[Ted Shrader]

David -

Nice job! Very unique design. I really like the shingle effect.

What is the hole diameter? Put out a For Rent sign, it should have some occupants come spring.

Ted

[David Wilson]

David -

Nice job! Very unique design. I really like the shingle effect.

What is the hole diameter? Put out a For Rent sign, it should have some occupants come spring.

TedThe hole is 1 1/8" diameter

[Chad Pater]

Very nice
BTW are you staying warm up there? Sure has been cold here!
Chad

[David Wilson]

Very nice
BTW are you staying warm up there? Sure has been cold here!
ChadJust checked the temp at 10:00 AM and it is up to 13 below. They are sayiny we could be above zero on tuesday.