Harry Robinette
02-04-2011, 1:47 PM
I've just through I'd better clarify how I built the back trap for my hollower. Don't use that self adhesive slick strip on the trap for the boring bar.You need to use the 1/8 or1/4 inch thick stuff put on with double face tape.The thin tape stuff wrinkles and tiers and just don't work good at all.If you use the heavy stuff and bolt the two pieces together like I did you can adjust the tension on the bar for how you are cutting.Hope this helps anyone using
this idea on there hollower.
this idea on there hollower.