Doug Wolf
02-04-2011, 10:48 AM
Here is what I made to support the long pieces that I cut on the bandsaw. I found a treadmill someone threw away and used the rubber covered drive roller, handrail and some of the metal to build an adjustable support.
It folds up against the bandsaw when not in use. It swings out on hinges and is held in position with an adjustable chain. The roller support tube moves in and out of a larger tube welded to the base and has a bolt to lock it in place.
181236 181235 181237181238
http://www.sawmillcreek.org/images/misc/pencil.png
It folds up against the bandsaw when not in use. It swings out on hinges and is held in position with an adjustable chain. The roller support tube moves in and out of a larger tube welded to the base and has a bolt to lock it in place.
181236 181235 181237181238
http://www.sawmillcreek.org/images/misc/pencil.png