Couple of saw handles

[Stewie Simpson]

Hi all. This is the latest backsaw handle design I just finished . It is much smaller in overall size to the previous handle I made.

You will notice the top and bottom outer edges of the new handle are now rounded off. I think it adds a lot more appeal to the final appearance.

http://i1009.photobucket.com/albums/af219/swagman001/1st%20dovetail%20saw/SDC10738.jpg

The timber is Tasmanian Blackwood.



Here is another one made out of Jarrah which I fitted to my dovetail saw.


http://i1009.photobucket.com/albums/af219/swagman001/1st%20dovetail%20saw/SDC10739.jpg

I am quite happy with this new design.

Stewie.

[Russell Sansom]

I like them both but prefer the one on the left. To me it says, "Here is a block of wood holding a blade with a loop of wood piercing it top and bottom to form a handle."
t
he top and bottom outer edges of the new handle are now rounded off
I like the squared-off look better than the rounded. It's that bauhaus urge for form to follow function.

[Marv Werner]

Hi Russ,

There's that word again....:D

[Jim Koepke]

They look good.

Just one question, since there isn't a "lamb's tongue" at the bottom, is the round carving called a "lamb's eye"?:D

jtk

[Stewie Simpson]

I like them both but prefer the one on the left. To me it says, "Here is a block of wood holding a blade with a loop of wood piercing it top and bottom to form a handle."
t
I like the squared-off look better than the rounded. It's that bauhaus urge for form to follow function.

Hi Russell. Thanks for the feedback.

Stewie.

[Stewie Simpson]

They look good.

Just one question, since there isn't a "lamb's tongue" at the bottom, is the round carving called a "lamb's eye"?:D

jtk

Hi Jim. Difficult to answer your comment. You have left me feeling a little "tongue tied". :eek:

Stewie.