Harry Robinette
02-02-2011, 11:06 PM
Hi All
This is my captive deep hollower,it's made like Frank Sudals except for the rear trap.The rear trap lower part is angle iron with wood and wood with UHMW plastic like stuff.We found that this combination help keep noise down,the tool slides easier and you have better control of the hollowing bar.The cutter is made from a heavy joiner blade.The round plate with slot is a piece of the bar with a slot milled or ground into it ( I've misplaced my cutter, thats way the allen wrench)the cutter I use is from the Sorby Multi-tip.I hope this might help someone making theirs.
181041.181037181038181039181040181042181043
http://www.sawmillcreek.org/images/misc/pencil.png
This is my captive deep hollower,it's made like Frank Sudals except for the rear trap.The rear trap lower part is angle iron with wood and wood with UHMW plastic like stuff.We found that this combination help keep noise down,the tool slides easier and you have better control of the hollowing bar.The cutter is made from a heavy joiner blade.The round plate with slot is a piece of the bar with a slot milled or ground into it ( I've misplaced my cutter, thats way the allen wrench)the cutter I use is from the Sorby Multi-tip.I hope this might help someone making theirs.
181041.181037181038181039181040181042181043
http://www.sawmillcreek.org/images/misc/pencil.png