PDA

View Full Version : General Metalworking Birdbath from 2 cymbals and a scrap piece of copper tubing



Doug Wolf
02-02-2011, 10:36 AM
First split a piece of copper tubing lengthwise, flatten it out, then roll it into a circle and braze the ends together.
Take 1 cymbal and cut a hole the size of your copper circle. This is your bottom and top rim. Braze these onto your copper ring.
Take another cymbal and cut dragonflies or other shapes and solder them to the birdbath.


180927 180928 180930180929
180926