Peter Odell
02-01-2011, 10:27 AM
I have a few gears to cut what is the easy way of connecting the nodes on the gear so the lasers sees it as on line to cut
Michael Hunter
02-01-2011, 10:41 AM
Select the lines, then under the "Arrange" menu, "Close Path - closest nodes with staright lines".
If this messes up, then undo and weld the line sections in a sensible order first, followed by the Close Path command again.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.