Prashun Patel
01-27-2011, 2:10 PM
Finally, I've found the combination of simple adapters to connect the Sawstop blade guard to a standard 2 1/2" hose. I apologize if this is old news:
HD sells a set of three shopvac adapters (VT1755). The smaller two couple together to slide perfectly into the guard, and a 2 1/2" shopvac hose with it's factory end. The part is $8. Makes it easy to decouple the hose and attach the other wands for
Anyway, I've been messing with duct tape and pvc fittings for long enough, so this has made a welcome addition.
Just thought I'd share.
HD sells a set of three shopvac adapters (VT1755). The smaller two couple together to slide perfectly into the guard, and a 2 1/2" shopvac hose with it's factory end. The part is $8. Makes it easy to decouple the hose and attach the other wands for
Anyway, I've been messing with duct tape and pvc fittings for long enough, so this has made a welcome addition.
Just thought I'd share.