Don Selke
01-13-2005, 3:49 PM
Just before the Christmas holidays, I decided it was time to build a new router table. I had the old set up for about fifteen years and it served me well except for storage, size and dust collection.
In revueing several designs, I decided on Norms table and fence system. I did make modifications on size to fit my shop and body size. All the drawings were done with Design CAD prior to construction of the project. I also used Aaron design for the fence dust collection pick up. I guess I could of designed the project from scratch but Norms design fit my needs perfectly.:) :eek:
To satisfy the Picture Police who have been knocking on my front door since I joined the Creek, I decided to post or try to post some pictures of the finished project.:eek: OOps; have to add pictures, will try later. Well I thought I had it figured out but I have to change the picture sizes, Here come the picture police again, I will have to lock the doors and shut the drapes.
Well guys and gals, you can call off the Picture Police now!!!!!!!!!!!!!
In revueing several designs, I decided on Norms table and fence system. I did make modifications on size to fit my shop and body size. All the drawings were done with Design CAD prior to construction of the project. I also used Aaron design for the fence dust collection pick up. I guess I could of designed the project from scratch but Norms design fit my needs perfectly.:) :eek:
To satisfy the Picture Police who have been knocking on my front door since I joined the Creek, I decided to post or try to post some pictures of the finished project.:eek: OOps; have to add pictures, will try later. Well I thought I had it figured out but I have to change the picture sizes, Here come the picture police again, I will have to lock the doors and shut the drapes.
Well guys and gals, you can call off the Picture Police now!!!!!!!!!!!!!