Recommend classic tail vise plans?

[Salem Ganzhorn]

Can anyone recommend a set of tail vise plans? Preferably plans you have built.
Thanks!
Salem

[Brian Kent]

I'm pretty sure the plans are in Scott Landis' "The Workbench Book". They have the plans for the Frank Klaus bench that includes a tail vise. I'll double check when I get home to see if that is the right Workbench book.

I made most of the Klaus workbench when I was only about 4 months into woodworking. I looked at that tail vise and just could not wrap my mind around what was happening. If I was doing it now, I would make a tail vise.

[Salem Ganzhorn]

Brian, I did notice that there is a google sketchup model for the Klaus tail vise floating around. It looks pretty complete. Currently that looks like my best bet. I have also seen this plan: http://www.jeffgreefwoodworking.com/pnc/ShopProj/woodvice/index.html but I could not really figure out how the support system worked.
Thanks!
Salem

[Brian Kent]

I'm at home now and it is the Scott Landis book. I can't judge between the two, but the link you showed may be simpler while Frank Klaus' may be better supported. I'll wait and watch for a post from someone who made the tail-vise.