All Pro Tools has some Biesemeyer Splitters on Sale for $78

[John Weber]

If you need a splitter it might be worth a look.

John

http://www.allprotools.com/store/page222.html

[Cliff Newton]

Which one fits the Grizzly 1023S?

[Mark Singer]

John,

Thanks, I just ordered one!

[Russ Massery]

the 78-961 for the right tilt
the 78-431 for the left tilt :D
I have the 78-431 on my 1023SL that's great price......... does'nt look as if the ones for the grizzly are included in this sale.
Russ.

[Joanne Adler]

Boo hoo--they don't make one for the PM 64A contractor saw. Anyone have a good aftermarket splitter for one of these saws?

[Jim VanBramer]

I have the Shop Fox 1677 left tilt, which is the Griz with a fresh coat of paint! I recently picked up the Delta splitter that I believe goes on their Unisaw, and altho Delta's customer service swore there was no way they'd ever make one that fits a competitors saw, it bolted right on! Only takes loosening a knurled knob to remove it as well. After tax it set me back about $32!!! ;) If you're interested send me a PM and I'll look up the part number for you.

Jim V

[John L. Gregory]

I checked the site and unfortunately they don't list the 78-431 for the left tilt Unisaw. Anyone know whether they carry it and whether it too is on sale?

[Rich Torino]

Jim, do you happen to know the PN for the Delta Splitter you purchased??

[Cliff Newton]

P/N 1349941 should work.




Jim, do you happen to know the PN for the Delta Splitter you purchased??

[Charlie Woods]

Will the 78-431 work with all left tilt cabinet saws including Jet?

[Ken Leshner]

Check Biesemeyer's website -http://www.biesemeyer.com/safety/index.htm. They list the part numbers of their splitters and which TS's they fit.

[Aaron Heck]

Jim, that's awesome to hear the cheaper splitter fits the SF saw. I had no idea. I think I'm going to go order one!

Aaron


I have the Shop Fox 1677 left tilt, which is the Griz with a fresh coat of paint! I recently picked up the Delta splitter that I believe goes on their Unisaw, and altho Delta's customer service swore there was no way they'd ever make one that fits a competitors saw, it bolted right on! Only takes loosening a knurled knob to remove it as well. After tax it set me back about $32!!! ;) If you're interested send me a PM and I'll look up the part number for you.

Jim V

[Chris Padilla]

Okay, who has THE place to buy the Delta splitter (1349941) cheapest?? :)

[John Keane]

Delta will sell you the same thing at 1/2 the price, and it will be for a thin kerf blade.

[John Keane]

As of 2/11/4 the price delivered from Delta was $38.41

[Jim VanBramer]

Jim, do you happen to know the PN for the Delta Splitter you purchased??

It's Delta part no. 1349941

[John Weber]

Delta will sell you the same thing at 1/2 the price, and it will be for a thin kerf blade.

John,

I'm not sure which splitter you are comparing, the cheaper splitter people are discussing is the splitter that comes with the Uniguard blade guard, and it is a good value. The splitter on sale is the Biesemeyer snap-in splitter, that runs about $120 at Amazon. I've had both, and for $78 the Biesemeyer is a good buy.

John

[John L. Gregory]

What is the source for the Delta splitter?

[John Weber]

John,

You can call Delta and order it directly, a Service Center such as the Chicago Area Service Center:

Pentair Tool & Equipment Sales
400 South Rohlwing Road
Addison, IL 60102
630-424-8805
fax: 630-424-8895

or another source is:

www.acetoolrepair.com

John