Harry Robinette
01-21-2011, 7:22 PM
Hi All
Just tried my laser on a small coring,the laser worked perfectly "the operator didn't".I found out doing a small one, that the laser needs to be set on the wide left side of the blade so you can keep track of that edge that is the part that goes through the bottom not the point.So I think my next larger coring may be done a little easier and with a smoother cut
179184.179181179182179183http://www.sawmillcreek.org/images/misc/pencil.png
Just tried my laser on a small coring,the laser worked perfectly "the operator didn't".I found out doing a small one, that the laser needs to be set on the wide left side of the blade so you can keep track of that edge that is the part that goes through the bottom not the point.So I think my next larger coring may be done a little easier and with a smoother cut
179184.179181179182179183http://www.sawmillcreek.org/images/misc/pencil.png