steven c newman
01-20-2011, 11:07 AM
I have one of those "Borg" medicene cabinets, with a door that is a beveled mirror. Mirror was just glued to a 3/8" plywood backer. The latch is one that you push the door in to open it. Just a pin at the top and bottom make a hinge, of sorts.
Well, mirror breaks. Now I need a way to replace the mirror. Pieces are still glued in place (most of them), but is a bit hard to see to shave. There is a "oak" face frame around the door opening. Mirror size is 14" wide, by 19-5/8 long. Beveled edges. PS: this is in a rental place ( I'm the rentee) Suggestions?:confused:
Well, mirror breaks. Now I need a way to replace the mirror. Pieces are still glued in place (most of them), but is a bit hard to see to shave. There is a "oak" face frame around the door opening. Mirror size is 14" wide, by 19-5/8 long. Beveled edges. PS: this is in a rental place ( I'm the rentee) Suggestions?:confused: