Pen Blank Squaring Jig

[Raymond Sprouse]

I just finished up a tutorial on a pen blank squaring jig used in conjunction with a bench top sander. Below is a picture of the project. To see my free visit my home page. By left clicking on my name you can access a link.
178158

Comments are welcome.

[Jeff Hamilton Jr.]

Awesome!! Thanks for doing this; I'm always looking for a better way. I'm definately going to give it a try.

Jeff

[Rob Wachala Jr]

Sure, you post the day after I ordered the sanding square jig off PSI. HaH.

[Raymond Sprouse]

Sorry Rob, I tried. Call and cancle with them.

[Raymond Sprouse]

I received a tip and thought I would share it. Add a second nut onto the bolt. Adjust the nut to press on the back of your blank to keep it from kicking back when it strikes the sanding disc. It works great.

[Bernie Weishapl]

Thanks for sharing Raymond. I like the idea of the second nut.

[Raymond Sprouse]

No problem Bernie. Like I said, it wasn't my idea but I liked it too.

[Raymond Sprouse]

Ok guys, I have another project almost finished that you may be interested in. I will post when I get it done. Keep an eye out for my pen blank drilling jig...