David Eisan
01-10-2005, 12:24 PM
Afternoon All,
Here is a little update on the doors and drawer fronts for my parents kitchen,
An awkward cut, raising the end of a very long narrow panel. Used a roller stand.
http://www.federatedtool.com/david/img/panel1.jpg
Rasing the rest of the panels wwas much easier, expecially with the help of a power feeder,
http://www.federatedtool.com/david/img/panel2.jpg
I made two jigs for the cope cuts, one for each end of the rails. I just made the jig, I had been free handing copes with a push block for the last 5 years, this is *much* nicer,
http://www.federatedtool.com/david/img/cope1.jpg
I never thought a door could look so pretty, but here is a single door that is supposed to look like two. It will be the front for the pull out pantry, I took 10 different photos, but none really turned out to show just how nice the door looks. There is a 3/8" wide, 3/16" deep dado in the centre of the middle rail to divide the doors.
http://www.federatedtool.com/david/img/bigdoor.jpg
http://www.federatedtool.com/david/img/bigdoordone.jpg
A couple of drawer fronts in clamps. Notice the one odd door, that is the front for the lazy susan (full height of undercounter cabinet). I will run a dado from side to side in it to make it look like a seperate drawer front and cupboard door.
http://www.federatedtool.com/david/img/dfs.jpg
Now for the other bazzilion panels I have to make...
David.
Every neighbourhood has one, in mine, I'm him.
Here is a little update on the doors and drawer fronts for my parents kitchen,
An awkward cut, raising the end of a very long narrow panel. Used a roller stand.
http://www.federatedtool.com/david/img/panel1.jpg
Rasing the rest of the panels wwas much easier, expecially with the help of a power feeder,
http://www.federatedtool.com/david/img/panel2.jpg
I made two jigs for the cope cuts, one for each end of the rails. I just made the jig, I had been free handing copes with a push block for the last 5 years, this is *much* nicer,
http://www.federatedtool.com/david/img/cope1.jpg
I never thought a door could look so pretty, but here is a single door that is supposed to look like two. It will be the front for the pull out pantry, I took 10 different photos, but none really turned out to show just how nice the door looks. There is a 3/8" wide, 3/16" deep dado in the centre of the middle rail to divide the doors.
http://www.federatedtool.com/david/img/bigdoor.jpg
http://www.federatedtool.com/david/img/bigdoordone.jpg
A couple of drawer fronts in clamps. Notice the one odd door, that is the front for the lazy susan (full height of undercounter cabinet). I will run a dado from side to side in it to make it look like a seperate drawer front and cupboard door.
http://www.federatedtool.com/david/img/dfs.jpg
Now for the other bazzilion panels I have to make...
David.
Every neighbourhood has one, in mine, I'm him.