View Full Version : Stanley 66 Beader
David Nelson1
01-10-2011, 8:21 PM
I'm looking to find a set of cutters for this tool and if possibe the straight fence.
James Taglienti
01-10-2011, 8:29 PM
there are repros on &bay right now...
Greg Wease
01-10-2011, 8:29 PM
The Lie-Nielsen cutters are interchangeable with the original Stanleys and are superior quality. St. James Bay also sells cutters and both fences.
David Nelson1
01-10-2011, 8:43 PM
Thanks for the help guys! I'm on it in the morning.
Glen Johnson
01-10-2011, 9:20 PM
I bought the ones that Lee Valley sells. I have been pleased with them.
Andy Hsieh
01-10-2011, 9:45 PM
my vote is for the Lie nielsen cutters - I have the LN 66 beader and had the Veritas beader - the cutters from LV are not as thick as the ones from Lie nielsen. Now that could be a good thing if you are making a bunch of different shapes for each cutter but I found it to chatter a bit more than the thicker stiffer blades.
Whatever you choose - the beaders are way fun.
harry strasil
01-10-2011, 11:30 PM
I made my cutter from an old worn out saw blade.
Roy Lindberry
01-11-2011, 1:45 AM
If you don't care about "original", you can make your own cutters from an old saw blade. By doing that, you have a lot of options available to you.
David Nelson1
01-11-2011, 4:09 AM
I can feel myself getting pulled into the abyss
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.