Stanley 66 Beader

[David Nelson1]

I'm looking to find a set of cutters for this tool and if possibe the straight fence.

[James Taglienti]

there are repros on &bay right now...

[Greg Wease]

The Lie-Nielsen cutters are interchangeable with the original Stanleys and are superior quality. St. James Bay also sells cutters and both fences.

[David Nelson1]

Thanks for the help guys! I'm on it in the morning.

[Glen Johnson]

I bought the ones that Lee Valley sells. I have been pleased with them.

[Andy Hsieh]

my vote is for the Lie nielsen cutters - I have the LN 66 beader and had the Veritas beader - the cutters from LV are not as thick as the ones from Lie nielsen. Now that could be a good thing if you are making a bunch of different shapes for each cutter but I found it to chatter a bit more than the thicker stiffer blades.

Whatever you choose - the beaders are way fun.

[harry strasil]

I made my cutter from an old worn out saw blade.

[Roy Lindberry]

If you don't care about "original", you can make your own cutters from an old saw blade. By doing that, you have a lot of options available to you.

[David Nelson1]

I can feel myself getting pulled into the abyss