Steve knight
01-09-2011, 9:09 PM
I got a job I bid on to cut these part out of 3/4" marine mahogany plywood. they are rectangles that have a bunch of 3" holes in them that are chamfered.
the thing is they have a tolerance of +.01 I will have to make a gage to check the holes but the thing is could the holes change size with the wood movement when they are shipped more then that? I know ply can change thickness not sure about length and width.
the thing is they have a tolerance of +.01 I will have to make a gage to check the holes but the thing is could the holes change size with the wood movement when they are shipped more then that? I know ply can change thickness not sure about length and width.