Phil Winn
01-09-2005, 8:44 PM
I was helping a young man build a Tiger Maple Mirror, it is all glued-up
and dry---unfortunately 50% of the joints have small gaps...
the finish will be some of Jeff Jewitts liquid dye and then some
Bartley Gel Poly---any suggestions for:
1. A material which will fill the joint gap and will take the finish and disappear?
2. Any other ideas beside redoing the project-I made this suggestion
but the youngster said "no".
Thanks,
Phil
and dry---unfortunately 50% of the joints have small gaps...
the finish will be some of Jeff Jewitts liquid dye and then some
Bartley Gel Poly---any suggestions for:
1. A material which will fill the joint gap and will take the finish and disappear?
2. Any other ideas beside redoing the project-I made this suggestion
but the youngster said "no".
Thanks,
Phil