New Shopnotes router mill.

[Dave Lehnert]

Anyone see the router mill in the new issue of Shopnotes? Looks interesting. May have to put this on my long list of projects.
Anyone with experience on a router mill. Do you see any issues with this design ?

Video link

http://www.shopnotes.com/issues/115/videos/router-milling-machine-video/

[Van Huskey]

I looked at it a long time when I got the issue. I couldn't help but think that someone that would use it enough to make it worth the time to build probably either has or plans to get a Legacy Ornamental Mill, which has more functions. It also reminded me of the thing Craftsman used to make, forget the name.

It would be a cool project but it my eyes unless you don't value your time much OR have plenty of time and want the challenge it seems like the Legacy makes a lot of sense or just buy your legs from Osbourne et al.

[Aaron Berk]

When I 1st got my mag and saw that jig I skipped all other pages and went straight to the article on the Mill. :eek: Allot of precision wood working going on there.

I like it............ :D allot

After seeing the vids on it I think I'd have to put a gear motor on that hand crank for the left to right router travel. Cranking that handle would drive me nuts.

The plans are in my to-do pile also, which is getting bigger every day:rolleyes:

[Dave Lehnert]

I guess my only issue is the size of the thing. At around 5 foot long, A lot of floor space for a tool not getting everyday use.

[Richard Wolf]

I think it looks great. There are a limited number of balusters which are fluted or twisted and I would be able to modify other balusters to give a larger selection. I have always lusted for the Legacy, but never could pull the trigger. I'll have to pick up a copy of Shop Notes.

[Harvey Melvin Richards]

I have a Craftsman router device that's cable driven. I bought it used 30 years ago, and I still haven't used it.

[Ryan Hellmer]

I think that's awesome. A great substitute for the Legacy mill. I've always loved the shop made tools that shopmotes features. I've been debating on building the edge sander for years. Here's my only beef with the mill. I have a legacy, it does take up a lot of floor space and I rarely (but occasionally do) use it. With the amount of time and materials and frustration you'd have building this mill, you could easily buy the legacy... or a used one like I did. I've got $400 and 2 hours worth of driving invested in mine and it came with some extra gears and a bosch variable speed router. Kudos to the inventive and talented folks at shopnotes.

[Van Huskey]

] buy the legacy... or a used one like I did. I've got $400 and 2 hours worth of driving invested in mine and it came with some extra gears and a bosch variable speed router.

Stealth gloat!

[John TenEyck]

Wow, thanks for posting this. This thing is fantastic. Looks like a challange to build, but what I great machine. Thanks again.

[Dan Tadie]

Use-Enco.com has free shipping thru 1-31-2011 on orders over $25 (use code FSCJAN) and the 1" x 5 tpi Acme screw is on sale for $29. All the parts that Shop Notes staff bought from McMaster Carr cost me around $45 from Enco. I did have to order regular 1" sleeve bearings, since the discontinued the flanged type. I can adapt them easily. In fact, I plan to build this using the full 72" length of the screw, rather than cut it off at 55" like Shop Notes did.

[Stephen Pereira]

I like it..a lot! I'll have to run up to the local bookstore to see if they this issue on hand. Too bad the router mill only moves in the X and Z axis. Perhaps some modifications could be made..like adding an xy table and vise.Oh Oh.. I can see yet another project in the making.

[Tom Ewell]

I have a Craftsman router device that's cable driven. I bought it used 30 years ago, and I still haven't used it.
I've actually used this one (bought about the same time ago) but it's just collecting dust for now.

[Harvey Melvin Richards]

I've actually used this one (bought about the same time ago) but it's just collecting dust for now.
What did you use it for? It seems like it would be mainly good for ornamental legs and lamp bases, neither of which I make.

[Tom Ewell]

What did you use it for? It seems like it would be mainly good for ornamental legs and lamp bases, neither of which I make.

Yep, ornamental legs and such, plus it was used before I got a lathe for lathe type fabrications.
Pain when it came to sanding though.
You might also use it to run single flutes on tapered square legs in a pinch.

[Carl Babel]

I suspect that for some, the journey is the reward - enjoying the process of creating a working machine. This would be the case for me, but I don't have a need for a router mill. Now, that mini-lathe that ShopNotes did a while back (I looked it up - issue 73), that is on my list.

[mreza Salav]

Looks interesting and very functional.

[Mike OMelia]

OK, I am glad someone brought this up. I know nothing about milling, but the mechanical engineer in me was facinated with this device. My going in assumption was that you had to own a lathe to get the round shapes and tapers done before hand. Is that true? This thing is for putting the gild on on the lilly, right? I would love to tackle this just for learning. But I don't have space for something like that. But, I might by the the subscription just to read about it!

Mike

[mreza Salav]

OK, I am glad someone brought this up. I know nothing about milling, but the mechanical engineer in me was facinated with this device. My going in assumption was that you had to own a lathe to get the round shapes and tapers done before hand. Is that true?

Mike

Didn't you watch all the video? He start from a square blank; all done on this machine.

[Mike OMelia]

No, sorry I did not. I was at work when I spotted it and videos are prohibited. Have not thought about it since. Thanks, I will go back and look.

Mike

[Larry L Edinger]

Has any one built this, seens I the hole location for the 1" flanged bearing on the Left Side and the Right Side don't mach Up, with the lift side being 19" tall and the right side being 18" tall. Or is it me?
Thanks