long soft jaw pins.

[Russell Eaton]

I have a need for long soft jaw pins for my oneway flat jaws. I have found some at penn state but I wanted to know if the threads are the same. I checked 2 local stores yesterday and had no luck. Thanks for the help. Russell

[Prashun Patel]

I have a Nova G3 chuck, and the soft jaws fit. If you call PSI, they'll tell you if the threads match. I believe mine are M6 threads.

[Russell Eaton]

I have spoken to customer service and they don't know. I just wonder if anybody else makes a similar product?

[Prashun Patel]

If u don't get responses, then take one of your existing jaw screws to HD and find what size it is. If the threads are M6, it'll work.

[Ryan Baker]

You can also use rubber stoppers and longer screws from the local hardware store.

[David T gray]

they work on the bigger set of flat jaws oneway has, dont know about the smaller ones i assume they would.

[Charlie Goodrich]

I made some, pretty easy.
- cut 2 inch long pieces (or as long as you want) from a 1 inch diameter dowel
- attach through the back of the plates with wood screws just small enough to go through threaded holes
- cover them with old bicycle inner tubes for grip or water pipe insulation for extra cushion, as needed
Sorry, no pics and posting too late tonight to get any :)