Tom Hartranft
01-03-2011, 6:36 PM
My new Delta 46-460 lathe is being shipped. Now building a heavy, basic utility bench for it. Found a lot of bench plans and pics online and have decided on a combination of features to include in my bench ... mostly from this one -- http://www.cranialstorage.com/wood/lathe_stand.html#auto_top
Have looked unsuccessfully online (SMC, Delta specs & online user manual, etc) to get following lathe dimensions to enable me to finish the bench before the lathe arrives:
1) Vertical height from spindle centerline to bottom of lathe base:
2) Horizontal length from left end lathe base mounting holes to right end mounting holes:
3) Horizontal length from front lathe base mounting holes to rear mounting holes on left and on right ends of the lathe:
Thanks in advance for your help as it will enable me to have the bench ready when the lathe arrives.
Thanks.
Tom
Have looked unsuccessfully online (SMC, Delta specs & online user manual, etc) to get following lathe dimensions to enable me to finish the bench before the lathe arrives:
1) Vertical height from spindle centerline to bottom of lathe base:
2) Horizontal length from left end lathe base mounting holes to right end mounting holes:
3) Horizontal length from front lathe base mounting holes to rear mounting holes on left and on right ends of the lathe:
Thanks in advance for your help as it will enable me to have the bench ready when the lathe arrives.
Thanks.
Tom