Stephen Maloney
12-27-2010, 2:39 AM
The other day I was checking my layout by vector tracing with the red dot, and I had the lid up and my exhaust off - I noticed my helix jerked/stuttered on the curves (especially those that involved a lot of vertical movement)- it struck me as odd. Normal?
It's not something I do a lot, so I don't really have a reference of what it usually sounds like. The cuts/engraving are always clean and sharp - but it just doesn't sound like a piece of precision equipment.
Thanks for your help!
SM <3
It's not something I do a lot, so I don't really have a reference of what it usually sounds like. The cuts/engraving are always clean and sharp - but it just doesn't sound like a piece of precision equipment.
Thanks for your help!
SM <3