Frank Pellow
01-04-2005, 5:50 AM
Last week in the thread http://www.sawmillcreek.org/showthread.php?t=15121, Terry Hatfield showed us a clever storage area that he had built for sheet goods.
I adapted Terry's design to suit my shop and that little project is now finished. Three pictures are attached
(1) I built a third wall (well fourth if you count the little angled wall) around my cyclone, insulated that wall (it will be covered with plywood), and put vents at the top and bottom. The reason for the vents is that, some day, I will complete the enclosure of the cyclone and I know that some ventilation will be needed. Outside that wall, I built a structure very much like Terry's.
(2) I also painted the outside wall with chalk board paint (for both me and my grandchildren to use).
(3) I very much like the "both sides open" design that Terry used.
Thanks for the idea Terry! :) By the way, that is a picture of your structure nailed to the end of my wall.
I adapted Terry's design to suit my shop and that little project is now finished. Three pictures are attached
(1) I built a third wall (well fourth if you count the little angled wall) around my cyclone, insulated that wall (it will be covered with plywood), and put vents at the top and bottom. The reason for the vents is that, some day, I will complete the enclosure of the cyclone and I know that some ventilation will be needed. Outside that wall, I built a structure very much like Terry's.
(2) I also painted the outside wall with chalk board paint (for both me and my grandchildren to use).
(3) I very much like the "both sides open" design that Terry used.
Thanks for the idea Terry! :) By the way, that is a picture of your structure nailed to the end of my wall.