First try at bracelets

[Dahl Troy Perry]

Here are some bracelets that I've tryed. I made a internal collet that uses a pipe plug to expand on the inside bored to 2.625. There are made with walnut, maple, coffee wood, ash. Finish with spray lacquer and buffed.

[Ken Hill]

They look pretty good from here! Post some pics of your collet

[John Keeton]

Dahl, that is some really nice work. Great combos on the laminations, and looks like they are finished out very well.

[Steve Schlumpf]

Well -- you sure been busy! Very nice looking bracelets! Looking forward to seeing some photos of your collet if possible!

[Doug W Swanson]

Dahl,

Just like everyone else says, those are very nicely done. They look great and are probably a simple way to use up some smaller pieces. I'd like to see your collet so maybe I can give them a try....

[Dahl Troy Perry]

Here is the collet it is nylon threaded 1-8 to screw on to the spindle and has a 1-1/4 tapperd pipe thread. Then I sawed it in 4 places which gives us 8 segments to expand.

[Ron Stadler]

Those look really nice, you look you spent some time on them, there all done so well.

[dan carter]

Nice looking bracelets; I like your chuck.

[gary Zimmel]

Nice work on the bracelets Dahl. Wood combos work very well together..