View Full Version : The New Guy

Ian Spence
01-03-2005, 11:46 AM
Hi All

Well I didn't get much done at work today but read through all of your post, what a great resourse for information.
We have recently purchased a ULS 30 watt Versalaser.
I think you will be seeing myself and my wife on here on a regular basis.
Thank you already for the information, tips and trick I picked up on today.


Mike Mackenzie
01-03-2005, 5:02 PM

I would like to offer any assistance you may need with your ULS Laser. We have been working with ULS for over 15 years. If you need any help just let us know.

Ted Shrader
01-03-2005, 5:15 PM
Ian -

Welcome to the Creek! A great place to hang out. Don't forget to visit the other forums here, too. Lots of good information to be had.


Keith Outten
01-03-2005, 9:41 PM
Welcome Ian,

There is lots of help here and you will find our members to be very friendly and informative.

Ian Spence
01-04-2005, 3:22 AM
Thanks, all.

I have to replace the x axis positioning sensor today when it shows up via Fed Ex, then we should be back up and running.

Kevin Huffman
01-05-2005, 9:53 AM
Welcome Ian,
The Creek is the place to be. There is a lot of info to be had.