PDA

View Full Version : Domino Costs.


Brian Jarnell
12-10-2010, 9:19 PM
Managed to hit a screw with the 10mm bit.

Taken small amount off sides .

Ordered a new one, had been wondering what they would cost..

Answer= $100.

I will be careful in future.
Terry Fogarty
12-10-2010, 9:23 PM
What a bummer. I done the same, but i didnt throw the old one out. I kept it because in the future if im going to Domino where i think a nail or screw might be, i will use the old cutter:)
Brian Jarnell
12-10-2010, 9:50 PM
What a bummer. I done the same, but i didnt throw the old one out. I kept it because in the future if im going to Domino where i think a nail or screw might be, i will use the old cutter:)

I will keep mine and ask my spindle moulder knife maker, what can be done.

Like you say, at worst we can use in doubtful areas.
Eiji Fuller
12-10-2010, 9:54 PM
Try the cmt domino bits.
Van Huskey
12-10-2010, 10:00 PM
I was about to say they were $35, but then I saw you are in NZ... bummer.
Terry Fogarty
12-10-2010, 10:01 PM
Brian, being a Kiwi you should give Linbide a ring and see if they have something similar or even make you one. Their stuff is the ducks nuts. I would be great if they could.
Brian Jarnell
12-10-2010, 10:16 PM
I was about to say they were $35, but then I saw you are in NZ... bummer.

That is $47 NZ, who is being ripped off then?
Brian Jarnell
12-10-2010, 10:18 PM
Brian, being a Kiwi you should give Linbide a ring and see if they have something similar or even make you one. Their stuff is the ducks nuts. I would be great if they could.

Will give them a go, but suspect one off is not going to help?
Van Huskey
12-10-2010, 10:22 PM
That is $47 NZ, who is being ripped off then?

If there is a next time feel free to PM me and I will get one and send it to you. It should be around $65 NZ with priority shipping.
Terry Fogarty
12-10-2010, 10:31 PM
Will give them a go, but suspect one off is not going to help?

Well tell them you want two and i will have one:D
Brian Jarnell
12-10-2010, 10:42 PM
If there is a next time feel free to PM me and I will get one and send it to you. It should be around $65 NZ with priority shipping.


You will do me Van.Thanks for offer.

Fingers crossed there is't a next time soon.

We have 240 volts, oterwise would have looked at getting Domino too.
Brian Jarnell
12-10-2010, 10:43 PM
Well tell them you want two and i will have one:D


Would you say 2 is big # :D
Terry Fogarty
12-11-2010, 8:49 PM
Ahhhh Cicero.... the internet world is such a small place :)
Brian Jarnell
12-11-2010, 8:55 PM
Ahhhh Cicero.... the internet world is such a small place :)


Even better here Terry...........

http://goo.gl/oguH0

Has someting changed with this site Terry, or is it my eyes?
Terry Fogarty
12-11-2010, 9:19 PM
Great price with those cutters. :)

Yep the site has changed for the good. Heaps better this format. I hop u-beaut follow in the not to distant future.
Rick Fisher
12-11-2010, 9:25 PM
Wow.. For one bit ?

Seems odd.. Isnt the whole set that much ?

I think CMT makes a bit as well.
Brian Jarnell
12-11-2010, 10:38 PM
Great price with those cutters. :)

Yep the site has changed for the good. Heaps better this format. I hop u-beaut follow in the not to distant future.


Must be an update of V-bulletin.

I thought the other was ok, but then I am in my dotage.