PDA

View Full Version : Spalted Birch



john l graham
12-08-2010, 1:25 PM
I finished this some time back but did not get a picture of it as I was having problems with white balance. I have finally got the whit balance down but now I need a bigger light box. This bowl pushed the limits at 6.75 in. diameter by 5.5 in. high and .25 in thick. Thanks for looking.

Baxter Smith
12-08-2010, 2:24 PM
Pretty bowl. The only spalted birch I have turned has been white/paper and it turns well. What variety is this one?

John Keeton
12-08-2010, 2:44 PM
Very nice piece of wood!! And, looks like you ended up with a well turned bowl, too!

No doubt, if this size pushes your light box - you are due a new one!

Jim Burr
12-08-2010, 3:05 PM
I'd be happy with both of 'em! Well done :D

David E Keller
12-08-2010, 10:24 PM
Nice looking bowl from some pretty wood.

Mark Hubl
12-08-2010, 10:30 PM
Nice looking bowl. Lovely little bit of spalting in the birch.

Bernie Weishapl
12-08-2010, 11:08 PM
Really nice bowl and wood.

Ron Stadler
12-08-2010, 11:13 PM
nice looking bowl, I like that form.

Tony Pridmore
12-08-2010, 11:57 PM
Good looking bowl. That wood has a lot of character.

Steve Schlumpf
12-09-2010, 9:30 AM
Good looking wood! Nice open form on your bowl!