Rolan Talbott
12-08-2010, 11:20 AM
Hi everyone
I' am in the looking of the used equipment to start a laser engraved business in Honduras, and I found two machines with some pros and cons.
the market that I will target is the memorials, architectural ceramic and crystals, so the machine must be able to work in either way.
I found a 2005 Vytek FX/2 2436 and a 2007 New Hermes Gravograph LS800 with the honeycomb table and the tool for cylindrical objects; my perception is that the Vytek will work better on the memorial and ceramic works due to it's work area than the LS800, but the Gravograph will be well for crystals, glass.
I know that I can buy separately the tool for cylindrical objects in the Vytek, but I would like to hear from your experience before I made the purchase.
Can you help me to take the right decision.
I don't have so much experience on the CO2 lasers.
Thanks for your time.
Regards
RT
I' am in the looking of the used equipment to start a laser engraved business in Honduras, and I found two machines with some pros and cons.
the market that I will target is the memorials, architectural ceramic and crystals, so the machine must be able to work in either way.
I found a 2005 Vytek FX/2 2436 and a 2007 New Hermes Gravograph LS800 with the honeycomb table and the tool for cylindrical objects; my perception is that the Vytek will work better on the memorial and ceramic works due to it's work area than the LS800, but the Gravograph will be well for crystals, glass.
I know that I can buy separately the tool for cylindrical objects in the Vytek, but I would like to hear from your experience before I made the purchase.
Can you help me to take the right decision.
I don't have so much experience on the CO2 lasers.
Thanks for your time.
Regards
RT