View Full Version : Foodsafe Finishes
Prashun Patel
12-02-2010, 4:11 PM
Has anyone used Almond oil as a foodsafe finishing oil? I'm not sure why Walnut oil has taken off, but Almond - which is quite widely used in other areas - has not...
Lee Koepke
12-02-2010, 9:09 PM
never thought of it. I would say its probably ok. I just read an article in one of my magazines this month regarding food safe finishes.
I use mineral oil on my cutting boards at wally-world its like 1.99 / quart ...real hard to beat that.
(attached the pdf I found)
Bernie Weishapl
12-02-2010, 11:04 PM
Finishes today are food safe if cured for 72 hrs. I use Mahoney's walnut oil. I really like the finish it produces. I don't care for mineral oil as it never dries as does other veggie oils.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.