Bert Solis
12-02-2010, 3:25 PM
Hi all:
Just wanted to share this little gizmo I came up with:
I wanted a laser guide to the boring bars, Glaser 3/4 inch and the Stewart 3/4 inch striaght and hook tool (next post)
There is in an album I posted in my profile, please feel free to take a look.
This system uses a very inexpensive laser (red) with hardware easy to find in the stores that cater to the motion picture industry.
Hope this helps others that may want to create a laser guided hollowing helper.
I would be happy to share the sources, they may even show on the pictures.
Enjoy
Bert Solis
Contributor
Just wanted to share this little gizmo I came up with:
I wanted a laser guide to the boring bars, Glaser 3/4 inch and the Stewart 3/4 inch striaght and hook tool (next post)
There is in an album I posted in my profile, please feel free to take a look.
This system uses a very inexpensive laser (red) with hardware easy to find in the stores that cater to the motion picture industry.
Hope this helps others that may want to create a laser guided hollowing helper.
I would be happy to share the sources, they may even show on the pictures.
Enjoy
Bert Solis
Contributor