James Combs
12-01-2010, 9:42 PM
... in the "Turners Forum" right? or Santa's flying around my shop.
Assembled this from art work parts supplied by a friend so don't fault me on the artwork.:eek::rolleyes:
My contribution was to fabricate the chassis (backbone), crank shaft and wind mill engine and assemble all the artsy parts to my chassis. The deer rise and fall at their front legs with every other one going opposite the other.
Stats:
Material (wood) = Mostly poplar, some maple, some plywood, and some hardboard.
Material (metal) = all brass hardware
Length = 20"
Speed = depends on how fast the reindeer can fly.;):rolleyes:
OK mods you can move it to where ever it should be:D
Assembled this from art work parts supplied by a friend so don't fault me on the artwork.:eek::rolleyes:
My contribution was to fabricate the chassis (backbone), crank shaft and wind mill engine and assemble all the artsy parts to my chassis. The deer rise and fall at their front legs with every other one going opposite the other.
Stats:
Material (wood) = Mostly poplar, some maple, some plywood, and some hardboard.
Material (metal) = all brass hardware
Length = 20"
Speed = depends on how fast the reindeer can fly.;):rolleyes:
OK mods you can move it to where ever it should be:D