PDA

View Full Version : Maintenance Manual / Service Mode for Spirit GX



Scott Anders
11-25-2010, 10:12 PM
Hi all,

Can anybody point me in the right direction for a maintenance manual for the Spirit GX, OR how to get into the service mode so i can align the mirrors myself. Any help would be greatly appreciated.

Marko Milosavljevic
11-26-2010, 2:32 AM
On my Spirit GE, holding autofocus button while powering on machine enters service mode, I think it is the same with GX.

Scott Anders
11-26-2010, 3:49 AM
On my Spirit GE, holding autofocus button while powering on machine enters service mode, I think it is the same with GX.
Thank you very much Marko, that got me in.:)

Viktor Voroncov
11-26-2010, 7:41 AM
To allign mirrors you don't need enter service mode.
Manual describing optics allignment is supplied with each GCC laser (at least here in Europe)

Scott Anders
11-26-2010, 4:42 PM
To allign mirrors you don't need enter service mode.
Manual describing optics allignment is supplied with each GCC laser (at least here in Europe)

Thanks Viktor, it doesn't show me how to do an alignment in my user manual, how do you do alignment without doing a small burn?