PDA

View Full Version : Deer and Moose


Dave Bell
11-23-2010, 12:41 AM
A couple of Deer and Moose Antler pens.......and lots more to follow now that hunting season is in full swing again.

All of the pens are 30-06 with FMJ bullet tips. The brass is dipped in lacquer and the antler is finished with CA and sanded to 12000 MM followed by Huts Ultra Gloss polish.

Comments and suggestions welcomed.

Dave

The Deer

http://www.stickermetimbers.com/pictures/pens/30_06ant1.jpg

The Moose
http://www.stickermetimbers.com/pictures/pens/30_06moo1.jpg
http://www.stickermetimbers.com/pictures/pens/30_06moo2.jpg
Billy Tallant
11-23-2010, 2:15 AM
Great looking pens. I like making these. They do sell well this time of year.
Rick Robbins
11-23-2010, 2:10 PM
nice looking pen's. good seller this time of year. Rick
Bernie Weishapl
11-23-2010, 4:22 PM
Great looking pen and should be a good seller during hunting season.
James Combs
11-23-2010, 7:39 PM
A couple of Deer and Moose Antler pens.......and lots more to follow now that hunting season is in full swing again.

All of the pens are 30-06 with FMJ bullet tips. The brass is dipped in lacquer and the antler is finished with CA and sanded to 12000 MM followed by Huts Ultra Gloss polish.

Comments and suggestions welcomed.

Dave




Nice looking pens. What did you use as your pen hardware? SlimLines?
Dave Bell
11-26-2010, 12:13 AM
Nice looking pens. What did you use as your pen hardware? SlimLines?

The hardware used is the tubes, twist mechanism, refill, and finial from a slimline kit. The clip was an addition. The casing is a once fired 30-06 and the bullet tip is a (FMJ) full metal jacket 30 caliber from Hornady.

Dave