covered bridge

[Cindy Rhoades]

I am looking for a vector image of a covered bridge I have one that does not engrave well and am trying to get this sign done for customer.

[Bill Cunningham]

Cindy; The images you are trying to use are very low res. The bridge is only 16 dpi and a RGB colour file to boot..You need at least 150, and 300 would be perfect. 16 is impossible to etch particularly at 14"x9" inches.
You may find a better one here,
http://www.google.ca/images?q=covered+bridge&um=1&hl=en&newwindow=1&safe=off&client=firefox-a&rls=org.mozilla:en-US:official&biw=981&bih=628&tbs=isch:1,itp:lineart,isz:m&source=lnt&sa=X&ei=t8TxTOe7BuGQnwfHoLmACg&ved=0CAkQpwU

If there is nothing under medium size, try large.. Then use trace to make a vector file you can re-size to any size