Jet air filter and Grizzly cyclone

[Jaromir Svoboda]

So I installed new Jet air cleaner and when I did press on buttom on remote control, cyclone went on too.
How do I fix it?
Thank you for your help.

[Matt Meiser]

They must have matching IR signals. Kind of crazy.

An easy fix could be to shroud the sensor on the air cleaner so you have to point the remote right at it. Since you only turn it on/off once per session most likely that wouldn't be too much trouble I assume. Try it with a toilet paper tube (but hurry because I heard on the news they are discontinuing the tubes in TP!)

[Leo Graywacz]

I think those are both infra red remotes. You will need to isolate them far enough away so that you don't point the beam in the general direction of both of them at the same time. If they are RF remotes you may have a problem unless there is an option to switch sub frequencies.

[Jaromir Svoboda]

I moved air cleaner on other side of shop and it works,and I can control cyclone and air cleaner with same remote.

[Leo Graywacz]

See, now you have an extra remote for both tools.