Bill Miltner
11-10-2010, 6:02 PM
The maintenance instructions for a Jet Drill Press say to "lubricate the gear and rack, table elevation mechanism, the splines (grooves) in the spindle and the teeth of the quill with a #2 tube grease".
What in the world is a #2 tube grease?
Wes Grass
11-10-2010, 6:21 PM
Probably a generic NLGI-2 grease, which is what just about anything you're likely to find at a hardware or auto parts store is.
And for these applications, just about anything that will keep them 'wet' would be fine. Spindle or motor bearings might be another story.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.