Please help me find.....

[Gene Howe]

...a switch that will turn on my DC when the TS is started.
Appreciate any help finding this item. I don't know what to call it to search for it.:confused:
Don't want the Long Ranger. Don't need another remote to clutter the shop and get lost.:mad:
Thanks folks!

Edit: I found it. Thanks, everyone.

[Forrest Bonner]

If you found the i-socket 110m be careful. After a couple of years use, mine failed but it failed in the mode of reduced voltage to my DC. I quickly shut off the DC before the motor was damaged.
Someone, somewhere must make one that has a relay on the DC output so if the electronics failed the voltage goes to zero.
Forrest

[Roger Jensen]

I don't know which one you found, but this one is great (from LeeValley and others):

http://www.leevalley.com/US/images/item/woodworking/assorted/03j6210s1.jpg

You can control the dc by a separate switch when you aren't using the tool, plus you can plug the dc powercord into a separate outlet/circuit if you have a high amperage tool.

Roger