View Full Version : Hello all
Rob Schuman
10-26-2010, 11:12 AM
I was wondering if anyone here has experience with a T5centauro copy lathe? Any help would be appreciated.
Bernie Weishapl
10-26-2010, 11:53 AM
Rob can't help ya with the lathe but did want to say welcome to SMC. Lots of good people and lots of knowledge.
Jim Burr
10-26-2010, 12:46 PM
Hi Rob...don't now a cotton pickin' this about duplicators, but I'd like to see pops up as I may be in the market someday.
Steve Schlumpf
10-26-2010, 3:10 PM
Rob - Welcome to the Creek!
First I have heard of that lathe and had to look it up. Not your typical garage shop lathe!
Rob Schuman
10-26-2010, 3:33 PM
Thank you for the welcome and the replys !!!!
Pete Jordan
10-26-2010, 7:05 PM
Wow Rob!
That is some piece of machinery!
Welcome to the creek!
John Keeton
10-26-2010, 7:22 PM
Looks kinda like my Delta 46-460!!:D:eek:
Welcome to SMC, Rob!! If you end up with one of these things, a gloat thread with pics is REQUIRED!!!!
Michael James
10-26-2010, 8:07 PM
Welcome to the vortex.... all internationally accepted currency is recognized in the purchase of tools and accessories!:p
ps -Where ya from?
David E Keller
10-26-2010, 8:12 PM
Can't help you with the machinery question, but I certainly want to join the others in welcoming you.
James Combs
10-26-2010, 9:13 PM
Ditto all the welcomes Rob, great to have you on board.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.