Jim Dunn
12-23-2004, 6:26 PM
Posting this over here also as the other forum is out hunting for food.:D
I am building a top for a down draft table. Having trimmed out the top I need to plane it down to the height of the peg board I am installing.
Planning in the corner is producing tear out problems.
As I've stated in the past, I am using what little skills I have, to practice on shop jigs and such so when I start to produce something pretty maybe
I can.:p
The peg board is designed short so as to shift it and close off the holes and use the vacumn produced in the box to draw dust from a spindle sander. Still have to build a blast gate. This may work maybe not.
I can't add the same pics here as I already have them on the "other side".
Jim
I am building a top for a down draft table. Having trimmed out the top I need to plane it down to the height of the peg board I am installing.
Planning in the corner is producing tear out problems.
As I've stated in the past, I am using what little skills I have, to practice on shop jigs and such so when I start to produce something pretty maybe
I can.:p
The peg board is designed short so as to shift it and close off the holes and use the vacumn produced in the box to draw dust from a spindle sander. Still have to build a blast gate. This may work maybe not.
I can't add the same pics here as I already have them on the "other side".
Jim